Hi, I have fixed the issue and have attached an updated version of the PicoScope4000aSettings.vi file. Which you needs to copy into local copy of the folder \ps4000a\PicoScope4000aLib\ I will update the Github repository soon with the new file. The issue is caused due to your scope not supporting th...

Hi Tomy,

Please email support@picotech.com to request some example code.
This is not quite ready for our Github repo.

Hi,
I can confirm the 2204A does support advanced triggers in both PicoScope 6 and PicoScope 7 software.

Hi, I have not used the this LabVIEW plugin, but know the MATLAB files generated from PicoScope 6 are in MATLAB 4 file format. I not sure if you can pass these functions this MATLAB version parameter. I believe PicoScope 7 will not add saving to MATLAB file format, but HDF5 file format instead. This...

Please try the fix here-
viewtopic.php?p=75461#p75461

Hi,
You download - "64 bit ps4000a SDK and 32-bit LabVIEW"
Which won't work, you need to use 32-bit SDK and 32-bit LabVIEW or
64-bit SDK and 64-bit LabVIEW to work.

Hi, For the 5242D it uses the 5000a API. If you are unsure in the future you can find the programmer guide on the download page for your model. It will tell which API (dll) to use. https://www.picotech.com/downloads Most of the LabVIEW examples have now been changed to run both on 32-bit and 64-bit ...

Hello Felix, Yes you can only get single function or the streaming method to retrieve data from one logger. There is not functions to for multiple devices. Have you used the example to connect to multiple TC-08 units? You need to enter serial numbers for each unit- https://github.com/picotech/picosd...

Hello Nadia, Can you confirm your application is to do the following with your PicoScope 5000 series- Setup - AWG output is connected to Channel A and DUT input via BNC cable and connectors. DUT output connected Channel B Code to - 1. Setup the AWG output a waveform continuously/fixed length 2. Setu...

Hi, No we don't offer SDK files for linux, only via repos and PicoLog 6. https://labs.picotech.com/debian/ (.deb files) https://labs.picotech.com/rpm/ (.rpm files) You can also extract the .so files from PicoLog 6 appimage but I don't know what libraries these depend on. See - https://www.picotech.c...

This video is old you are no longer required to move Pico dll's into the LabVIEW resource folder.

Please follow the instructions here-
https://github.com/picotech/picosdk-ni- ... les#readme

Hi all, Downsampling controls were set to ‘Aggregate' with downsample ratio of '1’ Causing blocks captures (Block, rapidBlock, rapidBlockbulk) to freeze/lockup. Maybe caused by driver changes also. I have updated most the 2000a examples with new defaults values ('none' and ratio of 2) also minor cha...

Hi, The youtube video is outdated I will try get this removed and updated. We have LabVIEW software examples are available from our GitHub repositories. https://github.com/picotech/picosdk-ni-labview-examples Please follow the instructions here- https://github.com/picotech/picosdk-ni-labview-example...

For a Rapid Block capture where you need to data download all the segment blocks use the PicoScopeXXXXExampleRapidBlockBulk.vi examples- For your 6404C use- 32-bit- https://github.com/picotech/picosdk-ni-labview-examples/blob/master/ps6000/32-bit-examples/PicoScope6000ExampleRapidBlockBulk.vi 64-bit...

Hi, The short answer is shown in the image below, by the red arrow. In the inner loop PicoScope3000aGetStreamingValues sub vi, is called and polls "IsReady" function in a loop until new data is ready. The wrapper shared library function gets data copied into the array. This is then indexed using the...