Hi,
The updated user guide quotes 50 ohms, which higher than what given on the web page for the TA41-
Output Source impedance (typical) 1 Ω @ 1 kHz, 8 Ω @ 1 MHz
In either case this should work fine for the sound cards input.
The newer version files were in the shared folder (repo) I have resaved these to version 2010, tested and pushed these to just the shared repo. Hopelly I haven't broken anything. You can get a new copy of the files here- https://github.com/picotech/picosdk-ni-labview-shared Or download the zip file-...
Hi,
Could you give some more details about your setup.
What model PicoScope do you have?
What OS are you using Windows 10/11, Linux?
Python version?
USB connection USB2 or USB3?
Hi, Ok I had little look at this, and this what I found- Fist tested by installing Picolog 6 which is a Appimage. This worked and could connect to the scope! Good! Back to PicoScope 7- The open Picoscope 7 device box seems to detect my 3206D as a "3000A series"? but fails to connect. Going to termin...
The rms value of all the cycles in a waveform buffer can be calulated with the maths channel- (sqrt(integral(A^2)/T)+freq(A)-freq(A)) If a trigger is used it must be at the start of the waveform buffer. Crest factor is the peak amplitude of the waveform divided by the RMS value of the waveform. Cres...
Hi, Able to save the psdata file and post here or email support@picotech.com The only spec is- "Trigger sensitivity (analog channels) - Digital triggering provides 1 LSB accuracy up to full bandwidth of scope" Triggering is done digitally and will related to Hysteresis setting for the trigger. Noisy...
Hi, Instead of using a callback function to know if a block/rapid block capture has finished you can poll the device using psXXXXIsReady(). With programming languages that don't support our C style callbacks like MATLAB, LABVIEW you have to use the polling option. timeIndisposedMs from the psXXXXRun...
If this is just happening one PC then try deleting the Appdata folder for PIcoScope 7, this sometime can cause issues- Close PicoScope 7 Paste- C:\Users\%USERNAME%\AppData\Local\Pico Technology Into the address bar of the File Explorer %USERNAME% should resolve to your Windows user account. Delete f...
Hi, Yes you can only have max. of 4 graphs at a time. Unfortunately there no shortcut to organise the channels into views. What Pico device(s) are you using with PicoLog 6? With the SDK you are not able to control the PicoLog 6 software, only the device itself. I could request a new feature be added...
Hi Rob, You should call the trigger functions after you have setup your channels (SetChannel(), SetDigitalPort()) If you are just setting up digital channels for trigging you only need to call- ps2000aSetTriggerChannelConditions() and ps2000aSetTriggerDigitalPortProperties() Note in streaming mode y...
Hi Nick, Check the USB device Permissions- Open a terminal- Connect the PicoScope to a USB port on the PC. Issue the command lsusb –l Does this command list Pico device(s) connected? check USB device Permissions- cat /etc/udev/rules.d/95-pico.rules Should give- ATTRS{idVendor}=="0ce9", MODE="777" Yo...