Picoscope 6404E data acuisition and visualization

Post your LabVIEW discussions here
Post Reply
krishnakanth
Newbie
Posts: 0
Joined: Thu Feb 29, 2024 7:31 pm

Picoscope 6404E data acuisition and visualization

Post by krishnakanth »

Hi,
I am using a Picoscope 6404E with Labview examples of 6000aExampleStreaming.vi, and 6000aExampleRapidBlockoverlapped.vi. My main aim is to see a stable spectrum on the scope or in Labview. Is there any method that i can make the picoscope to be stable, means it acquires for 200-300 ms and and shows the signal so that it looks stable on the screen. I am not sure this is possible.

AndrewA
PICO STAFF
PICO STAFF
Posts: 407
Joined: Tue Oct 21, 2014 3:07 pm

Re: Picoscope 6404E data acuisition and visualization

Post by AndrewA »

I assume you are using a FFT function in LabVIEW to generate a FFT plot?
To get a stable waveform you would need to enable the trigger with a block or rapid block capture.
Regards Andrew
Technical Specialist

Post Reply