any picoscope 3000 enthusiasts want to help?

Post your MATLAB discussions here
Post Reply
EEE_Student
Newbie
Posts: 0
Joined: Fri Feb 23, 2024 4:03 pm

any picoscope 3000 enthusiasts want to help?

Post by EEE_Student »

Hi everyone,

I am having trouble figuring out if i can use my Pico scope for my project. Here are some details for my project.

i have a sensor that is giving out a signal, this signal gets reduced the further away you are from it (couple centimetres). i have a receiver that picks up the signal. I want my program to get the voltage output from the Pico scope (for as long as the program is running). Here is where i think my issue lies, all of the examples have it do that the picoscope only takes data for a short amount of time. ultimately, I want it to tell me how far away it is from the sensor.

NeilH
PICO STAFF
PICO STAFF
Posts: 266
Joined: Tue Jul 18, 2017 8:28 am

Re: any picoscope 3000 enthusiasts want to help?

Post by NeilH »

Hi

Are you able to give more specifics about the application like the capture time and rate then I can give better advise for your usage of our scope?

Using the scope in MATLAB gives you extra flexibility when setting up the scope to match what you're needing it to do. We also do have example code available to get you started on your application too.

Neil
Neil
Technical Support Engineer

Post Reply