PicoScope 7 Software
Available on Windows, Mac and Linux
Hello
Hello
My name is ryan and I am working on electronics at my computer desk from home.I have built a waveform generator and also a pixie transciever. I am not sure how to or if i can test them with the picoscope.
Any way its nice to meet you guys and I am enjoying the library and explanations on this site.
Re: Hello
HI Ryan,
You certainly would be able to test your waveform generator and pixie transceiver using a PicoScope, but you would need to pay close attention to (a) the maximum bandwidths required to accurately reproduce the captured waveforms in the graphic display of our PicoScope Software and (b) what your measurement goals are now, and what they may be in the future, to get the best model for you. There is some information that may help you with this here: https://www.picotech.com/library/applic ... e-tutorial.
Regards,
Gerry
You certainly would be able to test your waveform generator and pixie transceiver using a PicoScope, but you would need to pay close attention to (a) the maximum bandwidths required to accurately reproduce the captured waveforms in the graphic display of our PicoScope Software and (b) what your measurement goals are now, and what they may be in the future, to get the best model for you. There is some information that may help you with this here: https://www.picotech.com/library/applic ... e-tutorial.
Regards,
Gerry
Gerry
Technical Specialist
Technical Specialist