Trigger AWG from scope

Post any questions you may have about our current range of oscilloscopes
Post Reply
alaric
Newbie
Posts: 0
Joined: Thu Nov 23, 2023 11:19 am

Trigger AWG from scope

Post by alaric »

Hi.

I'm trying to trigger the 2206B AWG with scope set as source. I have set the scope trigger to auto. It doesn't work in either the PicoScope 6 software or through Matlab. Can you help please?

Regards.

Al.

Gerry
PICO STAFF
PICO STAFF
Posts: 1144
Joined: Mon Aug 11, 2014 11:14 am

Re: Trigger AWG from scope

Post by Gerry »

Hi AI,

Sorry for the long delay in answering (the run up to christmas is often a difficult time to respond quickly, due to many users looking to get to a specific milestone before the holiday period). In case you still haven't been able to resolve this yourself I have added the following comments:

If you have set the PicoScope up correctly then there is no reason why this shouldn't work.So, if you can post a data file I can check your file to try and establish what is causing the problem.

Regards,

Gerry
Gerry
Technical Specialist

Post Reply