Bug? Extended UART decoding not working

Edson Brusque · Post by **Edson Brusque** » Wed Oct 04, 2023 3:53 pm

Hello!

I'm trying to use Extended UART decoding, but it's not working here.

Please, see attached picture.

On both UART decoding "lines", the parameters are the same. Except for the Extended one where I set Start Delimiter to "4349". I've tried other methods, like one byte instead of two, End Delimiters etc. Nothing seems to work.

Also, it would be great to have the option of using the break signal as a delimiter.

Thanks,

Brusque

Post by **Martyn** » Thu Oct 05, 2023 7:23 am

We need to see the psdata file matching the image so that we can see the setup and data. You can either post this here or send it to support@picotech.com

Edson Brusque · Post by **Edson Brusque** » Thu Oct 05, 2023 3:51 pm

Hello Martyn!

Please find the attached files.

Thanks!

Post by **Martyn** » Mon Oct 09, 2023 7:13 am

Thank you for the file. You can decode the signal if you use the between time rulers option in the decoder setup, but that requires manual intervention to drag the rulers to the appropriate postion. I have added this as a bug to our backlog of work, alongside supporting the break signal which was already on the list.

Test & Measurement Forum

Bug? Extended UART decoding not working

Bug? Extended UART decoding not working

Re: Bug? Extended UART decoding not working

Re: Bug? Extended UART decoding not working

Re: Bug? Extended UART decoding not working