Node Red integration

Discussion forum for the Picoscope 6 Linux software
Post Reply
ATTOM
Newbie
Posts: 0
Joined: Mon Sep 25, 2023 8:12 am

Node Red integration

Post by ATTOM »

Hi,
Is there a Node Red integration for USB TC-08 or is there a way to collect the values directly from the device without Picolog ?
Thanks for the help

Gerry
PICO STAFF
PICO STAFF
Posts: 1124
Joined: Mon Aug 11, 2014 11:14 am

Re: Node Red integration

Post by Gerry »

HI ATTOM,

There are a number of different unifying platforms that can be used for Test and Measurement Equipment. Unfortunately, we only have a limited number of Engineers and resources, so we only support Labview, and code bases such as C#, C++, python, Matlab, and VBA with our TC-08.

However, our PT-104 Temperature data logger can be accessed and controlled over the internet (as described on Page 15 of the Programmers Guide for the PT-104, here: https://www.picotech.com/download/manua ... -guide.pdf), as well as conventionally over USB using our PicoLog software (Note that this comment is in case you were only considering using a TC-08).

Regards,

Gerry
Gerry
Technical Specialist

Post Reply