PicoScope 6000 Series can´t connect with MATLAB

Post your MATLAB discussions here
Post Reply
palvarezsa
Newbie
Posts: 0
Joined: Tue Sep 19, 2023 1:34 pm

PicoScope 6000 Series can´t connect with MATLAB

Post by palvarezsa »

I was trying to connect my Picoscope 6426E to MATLAB, following the tutorial on YouTube. I installed the drivers, and the Add-ons of MATLAB (Instrument Control and PicoScope Support). However, when I run the example, this error appears:

Warning: No units found.
Opening PicoScope 6000 Series device...
Error using icdevice/connect
An error occurred while executing the driver connect code.
No unit found, please check connections.

Any ideas? Thanks!
Top
NeilH
PICO STAFF
PICO STAFF
Posts: 271
Joined: Tue Jul 18, 2017 8:28 am

Re: PicoScope 6000 Series can´t connect with MATLAB

Post by NeilH »

Hi

The 6000E devices use the ps6000a driver so need to use the corresponding set of examples rather than the ps6000 driver and examples.

Neil
Neil
Technical Support Engineer
Top
Post Reply

Return to “MATLAB”