Confirming J1939 in T&M 7 per the included link...

Post any questions related to the new PicoScope 7 software
Post Reply
nurber
Active User
Active User
Posts: 12
Joined: Fri Mar 24, 2017 6:05 pm

Confirming J1939 in T&M 7 per the included link...

Post by nurber »

Hi Forum. I'm without my 4444 at the moment so perhaps I don't see J1939 as an available protocol as a result of being in demo mode, but reading the following I believe that T&M now has J1939 included amongst decoders ?

https://www.picotech.com/news/news-arti ... -picoscope
Top
Martyn
Site Admin
Site Admin
Posts: 4501
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Confirming J1939 in T&M 7 per the included link...

Post by Martyn »

It is available when you have a scope from the 4000, 5000 or 6000 series connected to the software.
Martyn
Technical Support Manager
Top
Post Reply

Return to “PicoScope 7 for Windows, Linux and Mac”