PicoScope 7 Software
Available on Windows, Mac and Linux
Clear waveforms
Clear waveforms
Hello,
Is it possible to simple clear the screen of a waveform ?
I am using Picoscope 7 Test and Measurement Windows version with PicoScope 2204A.
Thank you,
Andrzej
Is it possible to simple clear the screen of a waveform ?
I am using Picoscope 7 Test and Measurement Windows version with PicoScope 2204A.
Thank you,
Andrzej
- Attachments
-
-
- PicoScope.png (18.94 KiB) Viewed 793 times
Re: Clear waveforms
Hi Andy,
I'm responding to this quite late, so if this is still an issue for you, then there is no clear function, as such, but one simple way would be to just turn off the Sig Gen and start a capture, However, if you are capturing the data of an external source then you would have to stop the data arriving at the Input Channel (e.g. disconnecting the BNC cable).
Regards,
Gerry
I'm responding to this quite late, so if this is still an issue for you, then there is no clear function, as such, but one simple way would be to just turn off the Sig Gen and start a capture, However, if you are capturing the data of an external source then you would have to stop the data arriving at the Input Channel (e.g. disconnecting the BNC cable).
Regards,
Gerry
Gerry
Technical Specialist
Technical Specialist