Problems with inaccurate 1216 readings

Post any questions you may have about our current range of USB data loggers
Post Reply
pip_ling
Newbie
Posts: 0
Joined: Tue Oct 27, 2020 4:30 am

Problems with inaccurate 1216 readings

Post by pip_ling »

I want meas current with 1216, when the power supply supplies power to the measured object, the current of the power supply is displayed as 310mA. (Figure 1)

According to the wiring diagram, I welded an 8 ohm resistance in R2. (Figure 2)

Connect the terminal board in series to the circuit, and the current of the power supply is displayed as 400+mA. (Figure 3)

Why?
Attachments
Figure 3.jpg
Figure 2.jpg
Figure 1.jpg

Post Reply