PicoScope 7 Software
Available on Windows, Mac and Linux
DALI-2 serial protocol decoding
DALI-2 serial protocol decoding
Hi @all,
I'm trying to decode DALI bus messages using the DALI serial decoding function. This works for DALI 8 and 16 bit messages, but not for DALI-2 24 Bit messages, those are just marked as "invalid". When using manchester decoding, 24 bit messages are shown correctly (but not DALI decoded).
Have I configured something wrong or is DALI-2 just not implemented? Can I somehow extend the decoder so that this works?
Thanks!
Software PicoScope 6.14.54.6108
I'm trying to decode DALI bus messages using the DALI serial decoding function. This works for DALI 8 and 16 bit messages, but not for DALI-2 24 Bit messages, those are just marked as "invalid". When using manchester decoding, 24 bit messages are shown correctly (but not DALI decoded).
Have I configured something wrong or is DALI-2 just not implemented? Can I somehow extend the decoder so that this works?
Thanks!
Software PicoScope 6.14.54.6108
Re: DALI-2 serial protocol decoding
Hi mwagner,
Sorry for the long delay in answering. I have been off work for different reasons, and only just caught up with a heavy workload, and backlog of Helpdesk tickets.
Unfortunately, Dali-2 is not implemented in our Serial Decoding yet. We are looking to do that some time next year.
Regards,
Gerry
Sorry for the long delay in answering. I have been off work for different reasons, and only just caught up with a heavy workload, and backlog of Helpdesk tickets.
Unfortunately, Dali-2 is not implemented in our Serial Decoding yet. We are looking to do that some time next year.
Regards,
Gerry
Gerry
Technical Specialist
Technical Specialist
Re: DALI-2 serial protocol decoding
Hello,
I would also be interested in support for DALI-2.
Especially for the 6-color message decoding.
At the moment the decoder showas a lot of "Special Command" messages which are hard to interpret.
E.g. this sequence controls Group 0 to be 0%R 0%G 0%B 100%White but its not decoded, see attached image and psdata record.
If you could add that support would be super great.
Best lambdaSky
I would also be interested in support for DALI-2.
Especially for the 6-color message decoding.
At the moment the decoder showas a lot of "Special Command" messages which are hard to interpret.
E.g. this sequence controls Group 0 to be 0%R 0%G 0%B 100%White but its not decoded, see attached image and psdata record.
Best lambdaSky
- Attachments
-
- 20220129-0003- RGBW Weiss Schalten.psdata
- (10.23 KiB) Downloaded 429 times
Re: DALI-2 serial protocol decoding
Hello is there any update on Dali 2 serial decoding?