Hi,
I just got my new PicoConnect 442 probe for the 4444 oscilloscope.
It work, but I am locked to a 100kHz bandwith limit. There is no other button available.
I tested it, in fact there is a low pass in place.
Tried to use another input and also deinstalled the software and installed again. I am on the 6.14.36 now, was on the beta version before.
What am I doing wrong? Would really need it to run at 10MHz as expected.
I had the same problem with a Picoscope 4444 with 442 probes and the 6.14.36 software. We found a copy of Picoscope6_r6_13_6.exe on our server and now we have NONE, 1mHz and 100kHz buttons available. We just turned "check for updates" off and are good to go.