Test and Measurement Forum

Which model?

Which product is right for your exact requirements

Which model?

Postby AJM » Tue Mar 27, 2007 8:47 am

All,

I need an oscilloscope to read data from the head of a dard drive, can you recomend the best model for this?

Thanks

AJM
AJM
 

Postby ziko » Tue Mar 27, 2007 9:04 am

Hi and thank you for your post.

Our oscilloscopes range from 3MS/s to 1GS/s, generally we say if you have a square waveform you would need to sample 10 times quicker then that, i.e. 10kHz you would need to sample 100KS/s. So it depends on how fast the signal is for a specification of our products please have a look at the link below:

http://www.picotech.com/oscilloscope-sp ... tions.html

Hope this helps.
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

CB Radio Tresting

Postby Guest » Tue Feb 12, 2008 1:02 pm

Which model would suit my XP PC/Laptop to check for af sine wave 1kHz to 20 kHz and FM discriminator/IF frequenccies 10 to 11 MHz and rf FM at 28Mhz

Peter Spider1
Guest
 

Postby ziko » Thu Feb 14, 2008 11:17 am

Hi and thank you for your post.

The 5203/4 have the analogue bandwidth and a high enough sample rate to give you a good represenation of those high frequencies.

http://www.picotech.com/picoscope5000.html


Kind regards

Ziko
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests