Hello Ali, If you are looking for a single one-tiem event, you will need to use either spectrum or scope view. With the scope view you can export the waveform to excel to perform your FFT. Or you can use the FFT window and configure the trigger to capture the waveform and perform the FFT for you. Be...

hello Tagge,

Thank you for your enquiry.

YOu will need to use PicoLog in block mode sampling. YOu can set the unit to wait for a trigger event and capture this as a block and save to disk.

Please check the software manual for instructions on how to do this.

Best regards,
Michael

hello,

Please post your support request to: support@picotech.com

We will try to help you.

Best regards,
Michael

Hello Tagge,

I have replied by email.

It sounds like your adc11 is displaying a quiescent voltage. If you add a signal input, you will see a true input voltage.

Best regards,
Michael

Hello,

Thank you for your enquiry.

Please consider the ADC20 & 24 for this kind of measurement.

Further information can be found here: http://www.picotech.com/precision-data-acquisition.html

Best regards,
Michael

Hello, Thank you for your post. Q1 Our USB adapter is designed to work with all of our parallel port devices. This will be suitable for your application. Q2 Each window that you open will be independant of the other windows. Time domain and frequency windows will each have their seperate settings. A...

Hello Peter,

Thank you for your post.

The insertion probe will be best suited to this type of use.

Best regards,
Michael

Hello

Answer provided by email.

best regards,
Michael

Hello Andy,

This problem seems to exist within the USB pipeline somewhere. We have yet to find a machine we can test this on as our machines are immune to this problem.

Best regards,
Michael

hello Andy,

Solution by email.

I trust everything is working ok now.

Best regards,
Michael

Hello, As I replied to your message by email I shall answer the post for other forum users. The product can be opened by one application at a time. You will not be able to run your own software alongside PicoLog. YOu can use DDE to link to PicoLog and your own application. I provided an example via ...

Hello Bartj,

The 3000 series oscilloscopes all use the same DLL and example codes. The function calls are identical for all of the 3000 series scopes.

Differences lie in the functionality of different scopes, please check the manual for full details.

Best regards,
Michael

Hello,

The pin comfiguration for the network and sensors can be found in the EnviroMon manual. For referrence, pin connections are straight 1-4.

Many thanks,
Michael

Hello Guest.

The ADC42 has a BNC connector, you will need to build or source a cable to connect your microphone.

Best regards,
Michael

Hello, I suggest that you save your log file to your PC hard disk and transfer to the network when complete. The log file is constantly written and saved during the logging session. This is to prevent data loss in the event of a power failure or similar. When saving over a network, traffic or data c...