Calibration certificate: PicoScope 4824, 4000A 5000 and 6000 Series’

The CC028 is a calibration service offered on the high-performance PicoScope listed below:

  • PicoScope 4824 8-channel oscilloscope
  • PicoScope 4000A Series 12-bit oscilloscopes
  • PicoScope 5000A/B/D Series flexible-resolution oscilloscopes
  • PicoScope 6000A/B/C/D Series

All our products are tested to ensure they meet their specifications. This means that you can be confident that all measurements you make with your Pico product will be within the accuracy that we specify.

If you plan to use your product in an industrial or scientific environment where it is necessary to have documented traceability, or you just want your Pico product to be fine-tuned to give the best possible performance, we can provide you with a calibration service referenced to national standards. This means that you will be given documented proof of the accuracy of your Pico product at the time it is despatched to you. This documented proof is in the form of a calibration certificate that has the errors recorded. For example, the product may have a published accuracy of ±3%, and the calibration certificate records the error as –1%. You can then allow for this –1% error when taking measurements.

For best accuracy, we suggest that a calibrated product is recalibrated yearly. For our recalibration service on your existing instrument, please contact our technical support team.

Pico products can also be calibrated by any accredited calibration provider.

PicoScope 6000 Series calibration certificate
In stock. Available for despatch.