Channel Settings to do Probe x10.

Post your LabVIEW discussions here
Post Reply
Govind
Newbie
Posts: 0
Joined: Wed Nov 25, 2020 8:38 am

Channel Settings to do Probe x10.

Post by Govind »

I have downloaded the LabVIEW driver and used it and it is working. But under the channel settings in
Picoscope 2000asettings.vi, there is no option to change the channel probe to times 10. How can I do that? Thank you.

AndrewA
PICO STAFF
PICO STAFF
Posts: 312
Joined: Tue Oct 21, 2014 3:07 pm

Re: Channel Settings to do Probe x10.

Post by AndrewA »

The probe interface on the 2000 series passive.
There is no scaling option that supports x10 probes in the API/dll functions.
So you need to add your own code to scale the channel voltage values, multiple by 10.
You could add a buttom to switch this on and off for each channel.
Regards Andrew
Technical Specialist

Post Reply