File format of .psdata

Having problems ? let us know the details here
Post Reply
Posts: 1
Joined: Thu Feb 16, 2017 11:25 am

File format of .psdata

Post by sagarshinde » Fri Feb 17, 2017 5:59 am

I have Picoscope 4225. I am using its LabVIEW drivers and I am able to read its data in LabVIEW. I need to save this data/waveform in such format that it can be imported in Picoscope 6 as well. I think Picoscope 6 only supports .psdata file format(propriety of PicoScope). The intention is to have both way compatibility of data file(data logged in file using Picoscope 6 should be able to read in LabVIEW and data logged in LabVIEW should be able to read in Picoscope 6.)

Initially, I decided to use 'save as' function in Picoscope 6 and export data in text format. This file I was able to read in LabVIEW. I created similar file using LabVIEW and tried to open it in Picoscope 6, but it says that file is corrupted or damaged. Assuming Picoscope 6 supports only .psdata format, I am left with only option of logging data in .psdata format from LabVIEW, for which I would like to know file format of it.
Any help/thought on this is appreciated.


Advanced User
Advanced User
Posts: 2856
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: File format of .psdata

Post by Hitesh » Fri Feb 17, 2017 9:04 am

Hi Sagar,

I have responded to your question on this thread.


Software Dev. Engineer

Post Reply