I am trying to copy and paste the measurements that are made in the cell at the bottom of the screen. How do I copy them so that I can paste them into an Excel worksheet instead of manually typing the data?
AndrewA, thanks for your response. Is there any way to append the data to the csv file to store multiple data points? Is it possible to customize the output of the measurement? For example, it would be convenient to have a column for RMS and one column for Maximum for each row that represents one measurement.
will append each measurement to the file.
Each line/row after 0ms: Measurements.CSV? is a whole Measurement. ie Channel, Name, Value, Min, Max, Average, StD, Capture Count Sapn
A,AC RMS,999.5 mV,999.5 mV,999.5 mV,999.5 mV,0 V,1,WholeTrace,
There are many ways to to remove '0ms: Measurements.CSV?' text and reorganize to text deal with multiple measures, per buffer.
You could use a scripting language or batch file, to do this. You can use excel to Switch (transpose) columns and rows https://support.office.com/en-ca/articl ... 513b094dc2
Opening the csv file the in Excel will let you sort these into columns.
I am trying to use a scripting language that can receive the output from a terminal command in Windows 7. When I run the command Picoscope.com /a Measurements.CSV? it is not able to get the output, it just waits for a response. I am wondering if it is a permissions issue? Is there another command I can try to get the measurement output?
Hi, Tomtam,
Yes you will need to run the 'command prompt' as administrator.
(start menu - cmd - right click on cmd.exe - click 'run as administrator' )
I would suggest you use the beta version of picoscope 6 to avoid this issue-
Point1 - topic19941.html#p62601
When I use the command prompt directly with a keyboard, I do not need to run as admin. I installed the beta, however it did not solve the issue of running the command via my program to grab the output. I can attach my program that executes the measurement command if that would help.
I've tried a few variations but can't seem to get the measurements from my Picoscope session out into the file.
I'm running PicoScope 6.11.12.1692, using a 2204A, and I have three measurements currently set up on Channel A: Cycle Time, High Pulse Width, and Low Pulse Width.
Unhandled Exception: System.BadImageFormatException: Could not load file or asse
mbly 'PicoScopeApp, Version=6.4.88.0, Culture=neutral, PublicKeyToken=d07fd3de7c
3ccbb2' or one of its dependencies. An attempt was made to load a program with a
n incorrect format.
File name: 'PicoScopeApp, Version=6.4.88.0, Culture=neutral, PublicKeyToken=d07f
d3de7c3ccbb2'
at Pico.PicoScope.PicoScopeCmdLine.Main(String[] args)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\M
icrosoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure lo
gging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fus
ion!EnableLog].
It looks like you might be using an old version of the PicoScope 6 software (6.4.88.0). The current stable latest version is 6.11.12.1692 or 6.12.3.2410 (Beta) available from Downloads.
I believe we have been contacted by one of your colleagues regarding the measurements so a member of our team will respond via the e-mail support ticket.
I have installed Picoscope 6.11 on my PC and open the command prompt with admin privilege .
The below error appears when I execute the command
C:\Program Files (x86)\Pico Technology\PicoScope6>Picoscope.com /a Measurements.
CSV? >> D:\measurements.csv
Error: Could not find an instance of PicoScope 6.
Also the measurement.csv has the below : 0ms: Measurements.CSV?
I have installed Picoscope SW 6.11 in two PC's.
In one PC I have Admin rights and in the other I don't have admin rights.
The PC in which I have admin rights it works perfectly fine
The PC in which I don't have admin rights ,I open the command window as " Run as administrator" and when I execute the
command to excess the measurement data I get the above error (Posted above).
Please let me know is it compulsory to have admin rights for the PC in which we execute the commands.