Hi,
I want that the information (measurements) in the spreadsheet (.xls - Excel) to be updated automatically each time PicoScope collects new data, so I select Copy measurements and then Paste Link or Paste Special rather than Paste as this creates a DDE link between the applications.
But now this function does not work successfully.
I add an attachment to see this mistake.
Please note that ChA (blue) is registered succesfully, but not ChB(red).
Hi, Michael.
I know the Red trace(ChB) is located further down the spreadsheet, but the values are incorrect. ChB takes a value fixed at - 2 V, when there are a sin wave showed on the PS screen!
I have performed the same test with "Pico Scope Demo" and it works ok. Every channel is located into excel file with its correct value.
Best regards,
Ariel
michael wrote:Hello Ariel,
I have used your PSD file to recreate your setup.
I have tested in Excel with success.
The Red trace(ChB) is located further down the spreadsheet, at the end of the Blue trace(ChA).