Data logger

Having problems ? let us know the details here
Post Reply
Posts: 0
Joined: Thu Oct 02, 2014 9:02 pm

Data logger

Post by Subfuntres » Thu Oct 02, 2014 9:07 pm

I have been using add 10 data logger for 5 yrs now. I am updating my pc but this logger with serial port input to pc will not work with my new pc running win7 any suggestions to update this please

Posts: 2855
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Data logger

Post by Hitesh » Fri Oct 03, 2014 12:01 pm

Hi Subfuntres,

Could you please confirm the model of the device you are using - there should be a label on the underside.

Please ensure that you are using the latest version of the PicoLog (5.23.0) or PicoScope 5 (5.21.2) software.

Do you have a serial port on the Windows PC or are you using a USB to Serial Converter? If it is the latter, please ensure that the converter is assigned with a sensible COM port number (e.g. COM 3) in the Windows Device Manager.

If you are using a product with a 25-pin parallel port connector to the PC, then the product will not work with a 64-bit operating system.


Software Dev. Engineer

Post Reply