Problem with the BNC Jack

Post any questions you may have about our current range of oscilloscopes
Post Reply
Posts: 0
Joined: Mon Sep 15, 2014 10:29 am

Problem with the BNC Jack

Post by underworldgamer » Wed Sep 17, 2014 5:09 pm

Hello together,

i put the BNC testing probe 10 times into the BNC - jack. After this they metal contact goes inside the plastic connector.


Mathias Koch
picoscope 2204a-1 (Small).jpg

Site Admin
Site Admin
Posts: 3740
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Problem with the BNC Jack

Post by Martyn » Thu Sep 18, 2014 6:09 am

Can you please contact directly with the full details including scope model, serial number and where it was purchased.
Technical Support Manager

Post Reply