PicoScope 7 Software
Available on Windows, Mac and Linux
Hmmm ... this call pattern pretty much matches what works fine on my PS2204A (uses the PS2000 driver). The double printing of the call is due to a benign bug in the code.ewald wrote: ↑Mon Oct 29, 2018 3:46 pmHi Aron And Martyn
Thank you
I mean the 3205 docent have a arbitrary waveform generator that i can control it is for sweeping filters and other stuff as far as I remember . That's the reason why I think that might be a problem
Below you will find the lock
while (0 < ps3000_open_unit( );
ps3000_get_unit_info( 1, 008FE3C8, 32, 4 );
while (0 < ps3000_open_unit( );
ps3000_get_timebase( 1, 3, 0, 0, 0, 1, 008FE7F0 );
ps3000_get_timebase( 1, 3, 0, 0, 0, 1, 008FE7F0 );Fatal error: Failed to determine sample buffer size: 0
ps3000_get_unit_info( 1, 008FE7D8, 32, 3 );
ps3000_set_channel( 1, 0, 1, 0, 3 );
ps3000_set_channel( 1, 1, 1, 0, 3 );
ps3000_get_timebase( 1, 3, 0, 0, 0, 1, 008FE81C );
ps3000_get_timebase( 1, 3, 0, 0, 0, 1, 008FE81C );Fatal error: Failed to determine sample buffer size: 0
ps3000_get_unit_info( 1, 008FE978, 32, 3 );
ps3000_get_unit_info( 1, 008FE978, 32, 4 );
Status: 3205 S/N: YSR76/070 successfully initialized.
ps3000_get_unit_info( 1, 008FE6E0, 32, 3 );
ps3000_get_unit_info( 1, 008FE6E0, 32, 4 );
Best
Lars
Here is an updated version with what I hope is working PS5000D series support: https://bitbucket.org/hexamer/fra4picos ... %20RC4.msijmasse wrote: ↑Mon Nov 05, 2018 6:28 pmHi Aaron,
Thanks for getting back. I do indeed have 10.6.13.58 in both 32bit & 64bit (my understanding is that this application is 32bit). I'd be happy to test it out for you. Would you just branch it on bitbucket? Please let me know what works best for you.
Cheers,
-Justin
Hi Marco,hochfrequenz wrote: ↑Sat Nov 03, 2018 7:47 pmHello,
are there any differences in measuring Speed between 2204A and 2205A? Start Frequency 50Hz, stop frequency 3,3kHz, steps 50 Hz.
I want to measure rc, lc-networks in at this Low frequency. I wonder if 2205A will be double-fast because of his double sample-rate? I don' t need the picoscope for any other application.
Is it possible to estimate the duration of the measurement using 2204A ans 2205A?
Best regards
Marco Schramm
Marco,hochfrequenz wrote: ↑Sat Nov 03, 2018 7:47 pmHello,
are there any differences in measuring Speed between 2204A and 2205A? Start Frequency 50Hz, stop frequency 3,3kHz, steps 50 Hz.
I want to measure rc, lc-networks in at this Low frequency. I wonder if 2205A will be double-fast because of his double sample-rate? I don' t need the picoscope for any other application.
Is it possible to estimate the duration of the measurement using 2204A ans 2205A?
Best regards
Marco Schramm
This depends on the sampling mode and scope model.
Just want to confirm a few things to help you out: