Test and Measurement Forum

TV repair

Which product is right for your exact requirements

TV repair

Postby mr2u » Sat Jul 03, 2004 11:43 am

Hi.
For Television repairing.
My question are which model is suitable for this task and do I need to have the unit calibrated .
Thanks or your time and helping
mr2u
User
User
 
Posts: 3
Joined: Sat Jul 03, 2004 11:34 am

Postby markspencer » Mon Jul 05, 2004 7:43 am

Hi,

Thank you for your request with regards to our products.

The units that are most appropriate for TV testing is the ADC-212 series and ADC-200 series. The unit that is required will depend on the highest signal that you anticipate measuring.

I would advise you look at the specifications for the above adn contact me again with any other questions you have.

Best regards,
Regards,

Mark Spencer
User avatar
markspencer
Site Admin
Site Admin
 
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Postby mr2u » Mon Jul 05, 2004 12:38 pm

Thanks .
How about the new model 3204 ( only 8bit ) . Do I need 12 bit ? or this model is good enough to handle the tuner frequencies ?
Again thanks or the help
mr2u
User
User
 
Posts: 3
Joined: Sat Jul 03, 2004 11:34 am

Postby ricardo » Tue Jul 06, 2004 9:00 am

Hi,

Thank you for your enquiry. The PicoScope 3204 should be capable of handling those frequencies and 8 bits is definitely enough.

Best Regards,

Ric
Ricardo Paloschi
Sales Engineer
Forum Moderator
User avatar
ricardo
Guru
Guru
 
Posts: 71
Joined: Wed May 07, 2003 9:43 am

Postby mr2u » Tue Jul 06, 2004 3:34 pm

You're great. Look like 3204 is my new toy or this summer.
One last question, Do I have this 3204 calibrate ?
Thanks
mr2u
User
User
 
Posts: 3
Joined: Sat Jul 03, 2004 11:34 am

Postby ricardo » Wed Jul 07, 2004 7:22 am

Hi,

The 3204 will already come calibrated :) However if you want a calibration certificate this will cost you extra.

Best Regards,

Ric
Ricardo Paloschi
Sales Engineer
Forum Moderator
User avatar
ricardo
Guru
Guru
 
Posts: 71
Joined: Wed May 07, 2003 9:43 am


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests