Test and Measurement Forum

PicoLog Spreadsheet cannot show move than 16 channel

Forum for discussing PicoLog

PicoLog Spreadsheet cannot show move than 16 channel

Postby hoeworld2001 » Thu Oct 14, 2010 7:36 am

:( i using TC08 and PicoLog 5.20.8.
My problem was Spreadsheet cannot show move than 16 channel data.

Anybody know this issue. Can you help me ..
hoeworld2001
Newbie
 
Posts: 0
Joined: Thu Oct 14, 2010 7:27 am

Re: PicoLog Spreadsheet cannot show move than 16 channel

Postby Pico Stuart » Thu Oct 14, 2010 2:12 pm

Dear hoeworld2001,

Thankyou for your inquiry with regard to the spreadsheet view of PicoLog. You are correct in observations PicoLog limits the channels to ensure that data clutter is reduced especially when viewing the data in Graph mode.

One option available to you is to use the grouping function, this will allow you to view the data in groups.

In the spreadsheet click on the Select Channels icon - This allows you to select measurements to display.

Parameter list. The selected parameters are highlighted. Click any parameter to select or deselect it.

Group. At the bottom is the Group list box. You can use this to save and restore a number of named groups of parameters.

To save the currently selected parameters as a group, type a new group name in the Group box and click Save.

To select a saved group, open the list box and click the required group. If you then click OK, the parameters from the selected group will be displayed in PLW Recorder.

To modify a saved group, make the changes to the parameter selection, type the group name and then click Save.

To delete a saved group, deselect all parameters, type the group name and then click Save.


Group. At the bottom is the Group list box. You can use this to save and restore a number of named groups of parameters.

To save the currently selected parameters as a group, type a new group name in the Group box and click Save.

To select a saved group, open the list box and click the required group. If you then click OK, the parameters from the selected group will be displayed in PLW Recorder.

To modify a saved group, make the changes to the parameter selection, type the group name and then click Save.

To delete a saved group, deselect all parameters, type the group name and then click Save.


In addition to this please proceed to the following link and download the Latest version of PicoLog

http://www.picotech.com/software.html

Kindest regards,

Stuart
Technical Speciliast
Pico Stuart
Site Admin
Site Admin
 
Posts: 72
Joined: Tue Jun 30, 2009 3:08 pm


Return to PicoLog

Who is online

Users browsing this forum: No registered users and 0 guests