Test and Measurement Forum

ADC-16

Which product is right for your exact requirements

ADC-16

Postby Vince Leslie » Mon Jan 19, 2004 10:13 pm

Hi,
Im interested in your AD-16 data logger. From I read this device has 8 differential inputs -2.5 to +2.5 volts. Do you have a adapter that allows the user to put scaling resistors in front of the DB25 connector to allow monitorig other voltages?

Thank you
Vince Leslie
 

Postby markspencer » Tue Jan 20, 2004 9:17 am

Hi,

The ADC-16 only has 4 differential voltage inputs with each referenced to ground. Unfortunately, it is not possible to do what you have requested.

Best regards,
Regards,

Mark Spencer
User avatar
markspencer
Site Admin
Site Admin
 
Posts: 598
Joined: Wed May 07, 2003 9:45 am

ADC-16

Postby Vince Leslie » Tue Jan 20, 2004 3:30 pm

I understand then that the ADC-16 has only four differential inputs. Is it possible to obtain a pdf of the DB -25 output and a specification of input and output impedances.

Thank you
Vince Leslie
 

Postby markspencer » Wed Jan 21, 2004 8:19 am

Hi,

You can dowmload the help manual that has the pin numbers and specification from here.

One of the formats it is available in is .pdf file.

Best regards,
Regards,

Mark Spencer
User avatar
markspencer
Site Admin
Site Admin
 
Posts: 598
Joined: Wed May 07, 2003 9:45 am


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 1 guest