Test and Measurement Forum

TV Antenna Fne Tuning

Which product is right for your exact requirements

TV Antenna Fne Tuning

Postby Guest » Wed Jan 14, 2004 3:29 am

What would be the most appropriate product for fine tuning and measuring signal strength from a UHF frequency television antenna?
Guest
 

Postby markspencer » Wed Jan 14, 2004 9:39 am

Hi,

Thank you for your question to advise you on which unit may be suitable please could you provide me with the maximum frequency that you would need. Is the signal repetative?

Best regards,
Regards,

Mark Spencer
User avatar
markspencer
Site Admin
Site Admin
 
Posts: 598
Joined: Wed May 07, 2003 9:45 am

UHF/VHF

Postby Omar » Thu Feb 03, 2005 9:31 pm

I am also interesting in fining tuning a tv antenna signal for VHF and UHF signals. The range needed is 50-905 mHz.

Would the adc-40 work for this? I don't have a logging need, either.
Omar
 

Postby Sarah » Fri Feb 04, 2005 9:25 am

Hi

Thank you for your post.

The ADC-40 would not be suitable for this as it has a spectrum bandwidth of 10kHz and this is much lower than the signals you are interested in.

Our fastest scope is currently the PS3206 and has a spectrum bandwidth of 100MHz. This would enable you to see some of the frequencies that you are interested in, however not the ones at the faster end of what you state.

Hope this helps

Best Regards
Sarah
 


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 1 guest