Test and Measurement Forum

use the picoscope 2104 to measure

Post your LabVIEW discussions here

use the picoscope 2104 to measure

Postby vienthong » Thu Apr 08, 2010 2:40 pm

with the VI ps2000.vi, i use the picoscope 2104 to measure the signal, but i don't know the frequency of the signal,can u help me! thank u !
(112.5 KiB) Downloaded 179 times
Posts: 0
Joined: Sat Mar 13, 2010 2:20 pm

Re: use the picoscope 2104 to measure

Postby christianbaker » Mon Apr 19, 2010 1:16 pm


You need to pass your aquired waveform through LabVIEW's 'Extract Single Tone Information' VI, which finds the frequency of the componant of your signal with the highest amplitude.

It's in Signal Processing> Waveform Measurements

Or, if your signal is more complex (it doens't look like it from your attachment) you'll need to do proper freqeuncy analysis with the LabVIEW octave analysis objects or FFT objects.

Posts: 0
Joined: Mon Apr 19, 2010 12:27 pm
Location: London, UK

Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 0 guests