Test and Measurement Forum

Picolog 1012 series - USB dataloggers

Post any questions you may have about our current range of USB data loggers

Picolog 1012 series - USB dataloggers

Postby sea » Thu Mar 11, 2010 10:14 am

Hi, :?:
I have installed the drivers and software for picolog 1012. But everytime I connect the USB device to my computer, I am requested to re-install the drivers. I get the following message in the device manager :
" This device is working properly.
The drivers for this device will be uninstalled when the machine is restarted. Any changes you make to this device will not be preserved.
If you are having problems with this device, click Troubleshoot to start the troubleshooter."

Thanks for any help.
sea
Newbie
 
Posts: 0
Joined: Mon Mar 08, 2010 5:04 pm

Re: Picolog 1012 series - USB dataloggers

Postby PeterF » Wed Mar 17, 2010 10:21 am

Hi,
Please make sure you have installed the latest versions of PicoLog (R5.21.1) and PicoScope6 (R6.3.43), or later. What version of Windows are you using?
Regards,
PeterF.
PeterF
Zen Master
Zen Master
 
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Re: Picolog 1012 series - USB dataloggers

Postby mikeref » Mon Nov 22, 2010 9:53 am

I have the same problems with the TC 8, when I start logging all is well and I have the graph and the actual temperature then the ntemperatures dissappear, the graph carries on but I cannot stop it and I have to restart the computor to get going again. This is the second computor I have put this software on and they both had this problem, I did hip ewith the new Sony I have it would be OK. any ideas?
mikeref
Newbie
 
Posts: 0
Joined: Mon Nov 22, 2010 9:34 am

Re: Picolog 1012 series - USB dataloggers

Postby PeterF » Mon Nov 22, 2010 10:55 am

Hi Mike,
This is the wrong thread to discuss this.
Yours is a different problem because you have a different logger completely. Please could you contact us by email on Helpdesk:-
support@picotech.com
and tell us the details of your TC-08 (serial or USB), version number of the PicoLog software you are using and any other relevant information. We can help you there easier.
Regards,
PeterF.
PeterF
Zen Master
Zen Master
 
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Re: Picolog 1012 series - USB dataloggers

Postby faysal » Thu Mar 24, 2011 8:58 am

Hi ,

I am using PICO 1012 to develop a real-time application.
Unfortunately, I cannot save the data automatically. Every single I want to save data I have to do it manually by selecting all the data and then saving it. Could you please tell how can I change this to auto mode
faysal
 


Return to USB PC Data Loggers

Who is online

Users browsing this forum: No registered users and 1 guest