TC-08 was not recognized as a USB device

Having problems ? let us know the details here
Post Reply
Guest

TC-08 was not recognized as a USB device

Post by Guest » Wed Jun 10, 2009 7:56 am

[quote]I used Windows XP and installed software by CD-ROM. And restarted my computer. And connected TC-08 to it with USB cable. It found USB, but It could not recognize USB collectly at all. Please let me know how shall I do.[/quote][quote][/quote]

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Post by Robin » Wed Jun 10, 2009 8:58 am

Hi

Can you check that the TC-08 is listed in Device Manager? If not and there is an "unknown device", right click and uninstall it. Then disconnect and reconnect the TC-08.

The Windows 'New Hardware Found Wizard' will run. Follow the on-screen instructions and, if the wizard asks to connect to Windows Update, select 'No' and allow Windows to automatically detect and configure your hardware product.

If you are still having problems, go to Control Panel -> System Properties -> hardware -> driver signing and make sure that either 'warn' or 'ignore' are selected.

If you have any further problems, please contact support:

support@picotech.com
+44 1480 396 395

Robin

Post Reply