Test and Measurement Forum

DrDaq and Logitron Insight

Having problems ? let us know the details here

DrDaq and Logitron Insight

Postby Guest » Thu Feb 05, 2009 10:50 am

We have had this problem for years wihout resolution and I have now been tasked with it again: Logitron Insight works fine with our DrDaq data loggers on our ancient Windows 98 laptops however I cannot get it working on our RM CC3 network stations running XP, even if I do a local manual install. Basically the Pico software works fine so it isn't a hardware issue, however Insight just says 'check the connection' when you tell it that a DrDaq is connected to LPT1. Anyone ideas?
Guest
 

Postby ziko » Mon Feb 09, 2009 2:27 pm

Hi all I can say is that some of the laptops don't have enough voltage for the parallel ports. What I can say is that you can get a Parallel to usb adapter which will allow you to use the device with your USB port

http://www.picotech.com/usb_parallel_port.html

Hope this helps.
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots


Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests