Post your VB and VBA discussions here
tobiashofer
User
Posts: 8 Joined: Thu Oct 09, 2008 7:33 am
Post
by tobiashofer » Fri Oct 10, 2008 9:28 pm
Hello
I'm using the USB ADC11/12 data logger. To test the system i connected it to my PC (win xp).
To test the communication i use the usbadc11.xls excel programm from the SDK.
If i connect the datalogger i get the driver and device information. but the function "Ready = UsbAdc11Ready(handle)" the ready flag is always falls.
Does anybody have an idea how the get this system working?
best regards
tobiashofer
User
Posts: 8 Joined: Thu Oct 09, 2008 7:33 am
Post
by tobiashofer » Fri Oct 10, 2008 9:46 pm
What i should mention is:
i can set the digital output, i get the calculated sample time from the
driver function.
maybe this additonal information helps to get closer to the failure
best regards
hofer tobias
tobiashofer
User
Posts: 8 Joined: Thu Oct 09, 2008 7:33 am
Post
by tobiashofer » Sun Oct 12, 2008 8:52 pm
Hello again
i did some further investigation on that topic problem. what i found out is the following.
i installed the driver on my labtop (win xp) and on this platform the excel programm is working as desired.
can anybody help me to get this problem fixed soon?
regards tobias
ziko
Advanced User
Posts: 1705 Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots
Post
by ziko » Fri Oct 17, 2008 3:52 pm
Hi tobiashofer,
Have you got the same software version installed on both your PC and laptop?
Kind regards
Ziko
Technical Specialist
tobiashofer
User
Posts: 8 Joined: Thu Oct 09, 2008 7:33 am
Post
by tobiashofer » Mon Oct 20, 2008 11:27 am
Hi Ziko
Yes, operating system is win. xp. The software is the simple excel vba example. driver .sys .inf and .dll are the same.
best regards
hofer tobias
ziko
Advanced User
Posts: 1705 Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots
Post
by ziko » Wed Oct 22, 2008 2:54 pm
HI tobiashofer,
Have you tried using PicoLog Recorder or PicoScppe to see if it works on the other computer?
Kind regards
Ziko
Technical Specialist
tobiashofer
User
Posts: 8 Joined: Thu Oct 09, 2008 7:33 am
Post
by tobiashofer » Thu Oct 23, 2008 6:02 pm
Hi Ziko
Yes i tried to collect a block of data with picolog. It dosn't work. So it seems that there is a problem with the driver and some pc's.
Best regards
tobias hofer
ziko
Advanced User
Posts: 1705 Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots
Post
by ziko » Fri Oct 24, 2008 3:38 pm
Hi tobiashofer,
If you require any further support regarding this please email us on support@picotech.com .
Kind regards
Ziko
Technical Specialist