Using 10BaseT1 Decoder in Picoscope 6

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
Prasant Singh
Newbie
Posts: 0
Joined: Mon Feb 05, 2024 3:01 pm

Using 10BaseT1 Decoder in Picoscope 6

Post by Prasant Singh »

Hello,

I was working on 10BaseT1 module. I was using Picoscope 6 to capture Ethernet Frames using the Decoder provided by default software.
When I try to decode the frames I am getting error saying Sample rate may be too low.
Could you help me find the solution to this.
I am using Picoscope 6 version number - 6.14.54.6108.
Is 10BaseT1 Ethernet frames decoding supported by this version.

Thanks
Attachments
Image of the error shown by Picoscope while decoding 10BaseT1 frames
Image of the error shown by Picoscope while decoding 10BaseT1 frames
Top
bennog
Advanced User
Advanced User
Posts: 208
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: Using 10BaseT1 Decoder in Picoscope 6

Post by bennog »

Can you post the .psdata file
or a screen shot of the properties so we know the sample rate
Views -> View properties

Benno
Top
Post Reply

Return to “PicoScope 6 for Windows”