PicoScope 7 Software
Available on Windows, Mac and Linux
Signal generator in Picoscope7
-
XavierPico
- Newbie
- Posts: 0
- Joined: Thu Jan 23, 2020 5:16 pm
Signal generator in Picoscope7
Dear all,
I used the sigal generator in Picoscope6, all correct.
When I try to find icon Signal generator in Picoscope7, I haven't got is yet.
Many thank for your help, how to configurate Signal generator in Picoscope7 please.
Kind regards
Xavier
I used the sigal generator in Picoscope6, all correct.
When I try to find icon Signal generator in Picoscope7, I haven't got is yet.
Many thank for your help, how to configurate Signal generator in Picoscope7 please.
Kind regards
Xavier
Re: Signal generator in Picoscope7
If you have a scope attached that has a Generator then the option can be found here
If you are running demo mode then it is not possible to change the signals.
Martyn
Technical Support Manager
Technical Support Manager
Re: Signal generator in Picoscope7
Having finally managed to install Picoscope 7, I started looking at the Signal Generator again.
Problem 1) the Support documentation https://www.picotech.com/library/oscill ... -generator is still for PicoScope 6!
Problem 2) I would like to trigger a sweep or Chirp, but it seems you have to turn the generator on (which then produces a sine wave or whatever is set) then "trigger" the Chirp, which starts out of the sine wave and then finishes, remaining in basic mode at the end of the sweep. Is it possible to trigger the Sweep from "off", and then return to "off" once the "cycles per trigger" has run?
thanks
Problem 1) the Support documentation https://www.picotech.com/library/oscill ... -generator is still for PicoScope 6!
Problem 2) I would like to trigger a sweep or Chirp, but it seems you have to turn the generator on (which then produces a sine wave or whatever is set) then "trigger" the Chirp, which starts out of the sine wave and then finishes, remaining in basic mode at the end of the sweep. Is it possible to trigger the Sweep from "off", and then return to "off" once the "cycles per trigger" has run?
thanks