Serial decoding from recorded waveforms

Post any questions related to the new PicoScope 7 software
Post Reply
Knauer
Newbie
Posts: 0
Joined: Thu Dec 17, 2020 4:05 pm

Serial decoding from recorded waveforms

Post by Knauer »

Hey,

I recorded some hundred waveforms on two channels. Both had a serial decoder applied, but out of some reason (maybe signal threshold was set too high), one of the decoders didn't work. How can I decode the waveforms afterwards?
Top
Martyn
Site Admin
Site Admin
Posts: 4501
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Serial decoding from recorded waveforms

Post by Martyn »

You can add or adjust a decoder post capture in the same way you can when you have the scope running.
Martyn
Technical Support Manager
Top
Knauer
Newbie
Posts: 0
Joined: Thu Dec 17, 2020 4:05 pm

Re: Serial decoding from recorded waveforms

Post by Knauer »

Ah, sorry, I missed it, because my parameters were still wrong. Now I managed it. Thank You!
Top
Post Reply

Return to “PicoScope 7 for Windows, Linux and Mac”