PicoScope 7 Software
Available on Windows, Mac and Linux
Is it possible to disable the yellow Mask Fail A trace?
Is it possible to disable the yellow Mask Fail A trace?
Hi, I'm using PicoScope 6 .14.61.6219 with a PicoScope 4227, albeit an old one. I have it in Spectrum Mode for conducted emissions measurements and I've added a mask to show the limit for the maritime IEC60945 spec which is between 50 & 96 dBuV and 10kHz and 30MHz. The LISN is connected to input A.
My question is whenever the limit is exceeded, I get a yellow Mask Fail A trace that obscures the plot. Is there a way to remove or disable this yellow Mask Fail A trace? I can change the colour of it in the Tools > Preferences... > Colors > Masks menu, but I can't hide it.
Thanks, Moz
My question is whenever the limit is exceeded, I get a yellow Mask Fail A trace that obscures the plot. Is there a way to remove or disable this yellow Mask Fail A trace? I can change the colour of it in the Tools > Preferences... > Colors > Masks menu, but I can't hide it.
Thanks, Moz
- Attachments
-
Re: Is it possible to disable the yellow Mask Fail A trace?
The mismatch between the yellow and blue traces is a separate bug I believe. I changed the X Axis X-Scale to Log 10 instead of Linear but the yellow trace doesn't change scale - it seems to stay fixed as Linear.