PicoScope 7 Software
Available on Windows, Mac and Linux
Coupling Issue AC/DC
-
dpccreating
- User
- Posts: 2
- Joined: Mon Feb 07, 2022 4:11 pm
Coupling Issue AC/DC
My AC/DC coupling is not functioning correctly.
Currently Channel A cannot AC couple, it's always DC coupled no matter the setting.
Currently Channel B is opposite, AC is DC coupled and DC is AC coupled.
My Picoscope Setup:
PicoScope® 6 - PC Oscilloscope software version: 6.14.54.6108
Model: PicoScope 2204A
USB Version: 2.0
Calibration Date: Thursday, April 22, 2021
Hardware Version: 17
Driver Version: 3.0.75.2957
Processor Intel(R) Core(TM) i5-7400 CPU @ 3.00GHz 3.00 GHz
Installed RAM 8.00 GB
Device ID 739ECCA6-4702-478E-BE8E-AF7990265568
System type 64-bit operating system, x64-based processor
Windows 10 Home Edition
Version 21H1
Installed on 8/14/2021
OS build 19043.1466
Experience Windows Feature Experience Pack 120.2212.3920.0
Currently Channel A cannot AC couple, it's always DC coupled no matter the setting.
Currently Channel B is opposite, AC is DC coupled and DC is AC coupled.
My Picoscope Setup:
PicoScope® 6 - PC Oscilloscope software version: 6.14.54.6108
Model: PicoScope 2204A
USB Version: 2.0
Calibration Date: Thursday, April 22, 2021
Hardware Version: 17
Driver Version: 3.0.75.2957
Processor Intel(R) Core(TM) i5-7400 CPU @ 3.00GHz 3.00 GHz
Installed RAM 8.00 GB
Device ID 739ECCA6-4702-478E-BE8E-AF7990265568
System type 64-bit operating system, x64-based processor
Windows 10 Home Edition
Version 21H1
Installed on 8/14/2021
OS build 19043.1466
Experience Windows Feature Experience Pack 120.2212.3920.0
Re: Coupling Issue AC/DC
It's sounds like there is damage to the input circuit for both channels, so I would suggest emailing support@picotech.com and the team can discuss the options with you.
Martyn
Technical Support Manager
Technical Support Manager
-
dpccreating
- User
- Posts: 2
- Joined: Mon Feb 07, 2022 4:11 pm
Re: Coupling Issue AC/DC
Thanks, I've come to that conclusion too. But in this case, it's a new unit, I'm just noticing this as I have only used a single channel mode up to now.