PicoScope 7 Software
Available on Windows, Mac and Linux
Pico triggers multiple times in a short time
Pico triggers multiple times in a short time
I have a signal as shown in the figure below. There are about 12 pulses, the pulse width is 1 microsecond, and the pulse interval is 100 milliseconds. I want to measure only these 12 pulses and display them on the screen.
Re: Pico triggers multiple times in a short time
HI liuai987,
Could you answer the following:
1/ Would this be In PicoScope 6, or would you be using the Software Development Kit?
2/ What PicoScope are you using?
3/ What sort of accuracy do you need (e.g. do you want to measure the height or rise-time with accuracy and if so what accuracy, or do you just want to detect them)?
4/ Are you only interested in the pulses, or do you also want to also measure the spacing between them?
Regards,
Gerry
Could you answer the following:
1/ Would this be In PicoScope 6, or would you be using the Software Development Kit?
2/ What PicoScope are you using?
3/ What sort of accuracy do you need (e.g. do you want to measure the height or rise-time with accuracy and if so what accuracy, or do you just want to detect them)?
4/ Are you only interested in the pulses, or do you also want to also measure the spacing between them?
Regards,
Gerry
Gerry
Technical Specialist
Technical Specialist