PicoScope 7 Software
Available on Windows, Mac and Linux
Problem with decoding CAN frame in PicoScope 6
Problem with decoding CAN frame in PicoScope 6
Hi!
I have a MCP2515 board hooked up to an Arduino which is transmitting data to a Raspberry Pi connected to a MCP2515. The RaspberryPi is able to see and dump the data successfully using candump, but when I probe the bus, including the SPI on the Arduino, PicoScope is not able to decode the frame data... Screenshow below
https://drive.google.com/file/d/13giHiH ... v1IHs/view Link to Google Drive screenshot
Can someone help me what I need to change in PicoScope to get the decode to work correctly? I am led to believe the frame must be OK if it is dumped without any issues on Linux
Thanks,
Manj
I have a MCP2515 board hooked up to an Arduino which is transmitting data to a Raspberry Pi connected to a MCP2515. The RaspberryPi is able to see and dump the data successfully using candump, but when I probe the bus, including the SPI on the Arduino, PicoScope is not able to decode the frame data... Screenshow below
https://drive.google.com/file/d/13giHiH ... v1IHs/view Link to Google Drive screenshot
Can someone help me what I need to change in PicoScope to get the decode to work correctly? I am led to believe the frame must be OK if it is dumped without any issues on Linux
Thanks,
Manj
Re: Problem with decoding CAN frame in PicoScope 6
The link is protected.
Can you post the psdata file here or send it to support@picotech.com
Can you post the psdata file here or send it to support@picotech.com
Martyn
Technical Support Manager
Technical Support Manager