PicoScope 7 Software
Available on Windows, Mac and Linux
Using a Picoscope as SPI/I2C generator
Using a Picoscope as SPI/I2C generator
Would it be feasible to use a Picoscope 2405A to generate SPI or I2C signals, either via its SDK or even the built-in arbitrary waveform generator?
I would use it in such a manner only occasionally, to write a EEPROM chip, for example.
I would use it in such a manner only occasionally, to write a EEPROM chip, for example.
Re: Using a Picoscope as SPI/I2C generator
I use this USB - spi - i2C converter to generate i2c and SPI signals.
It a lot less complex than using the AWG as generator.
Benno
It a lot less complex than using the AWG as generator.
Benno
Re: Using a Picoscope as SPI/I2C generator
Thanks, I will look into that instead. I had also considered a Bus Pirate.
Anyway, nice to have this possibility directly with the AWG.
Anyway, nice to have this possibility directly with the AWG.