Saving channel signals automatically

Having problems ? let us know the details here
Post Reply
wartburg
Newbie
Posts: 1
Joined: Sun May 17, 2020 12:47 pm

Saving channel signals automatically

Post by wartburg »

Dear All!

Now I am testing a monochromator, giving approx 1kHz square signals continuously in both CH1 and CH2, after an initial cca 90 sec inactive (self test) period. Both signals are 5V.
How can I save the very beginning of the signal stream automatically to jpeg files?
It would be also good, if I can set a threshold (say 1..2 volt) as a starting signal for the saving process.

Thanks
Peter

Martyn
Site Admin
Site Admin
Posts: 4013
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Saving channel signals automatically

Post by Martyn »

Sorry for the slow reply due to the current situation.

What device do you have and what software are you are using ?
Martyn
Technical Support Manager

Post Reply