PicoScope 7 Software
Available on Windows, Mac and Linux
PS6000 Software Advanced Triggering
PS6000 Software Advanced Triggering
Hello all. I need assistance setting up a PS6404D scope to trigger off of any of the 4 input channels (a code sample would be awesome). So we need to OR the input channel triggers. I have seen this topic on this forum dated back in 2016 where a sample of code was given for a PS2000. The API is different or has changed with the PS6000 software. Any assistance would be greatly appreciated. There is a conflicting bit of information in the picoscope-6000-series-programmers-guide that states as follows:
"The channels that are set to PS6000_CONDITION_TRUE or
PS6000_CONDITION_FALSE must all meet their conditions
simultaneously to produce a trigger. Channels set to
PS6000_CONDITION_DONT_CARE are ignored."
"The channels that are set to PS6000_CONDITION_TRUE or
PS6000_CONDITION_FALSE must all meet their conditions
simultaneously to produce a trigger. Channels set to
PS6000_CONDITION_DONT_CARE are ignored."
Re: PS6000 Software Advanced Triggering
Sorry for the slow reply due to the current situation.
Please email support@picotech.com with details of your application and programming language used, then the relevant member from the team will be able to assist.
Please email support@picotech.com with details of your application and programming language used, then the relevant member from the team will be able to assist.
Martyn
Technical Support Manager
Technical Support Manager