PicoScope 7 Software
Available on Windows, Mac and Linux
Charting
-
Grizzly_Gra
- User
- Posts: 3
- Joined: Thu Mar 01, 2018 10:02 pm
Charting
Hi, I now have my ADC20 setup and capable of recording a number of channels and within Picolog-6 I now have all the channels configured across 3 axis so can record and get the graphs as I was hoping for.
What I now need to do is set the graph so it is a little clearer and understandable when I export it (hopefully directly as a .pdf).
Could I get guidance for:
1.) How can the channel names be shown on the graph
2.) How can Capture Notes be added as block text or overall Graph title
3.) Change the visual ratio of the 3 axis. On the graph below the data in the lower section is very simple and binary like so would like to squeeze that up and give more room to the complex middle section (which will become more complex when in real time use with all channels running).
What I now need to do is set the graph so it is a little clearer and understandable when I export it (hopefully directly as a .pdf).
Could I get guidance for:
1.) How can the channel names be shown on the graph
2.) How can Capture Notes be added as block text or overall Graph title
3.) Change the visual ratio of the 3 axis. On the graph below the data in the lower section is very simple and binary like so would like to squeeze that up and give more room to the complex middle section (which will become more complex when in real time use with all channels running).
- Attachments
-
-
Grizzly_Gra
- User
- Posts: 3
- Joined: Thu Mar 01, 2018 10:02 pm
Re: Charting
Hate to nag, but any clues on how to get the best out of producing graphs would be appreciated 