Hi, is understand now that there is no picoscope software available on this platfrom. I will be looing to create my own program to run the neccesary drivers. I followed the steps from the following page: https://www.picotech.com/downloads/linux
I recieved the following upon attempting to install with - sudo apt-get install picoscope
The following packages have unmet dependencies:
picoscope : Depends: picomono (>= 4.6.2.16-1r02) but it is not installable
Depends: libpicoipp (= 1.3.0-4r21) but it is not going to be installed
Depends: libpl1000 (= 2.0.0-1r570) but it is not going to be installed
Depends: libps2000 (= 3.0.0-3r570) but it is not going to be installed
Depends: libps2000a (= 2.1.0-5r570) but it is not going to be installed
Depends: libps3000 (= 4.0.0-3r570) but it is not going to be installed
Depends: libps3000a (= 2.1.0-6r570) but it is not going to be installed
Depends: libps4000 (= 2.1.0-2r570) but it is not going to be installed
Depends: libps4000a (= 2.1.0-2r570) but it is not going to be installed
Depends: libps5000 (= 2.1.0-3r570) but it is not going to be installed
Depends: libps5000a (= 2.1.0-5r570) but it is not going to be installed
Depends: libps6000 (= 2.1.0-6r580) but it is not going to be installed
Depends: libusbdrdaq (= 2.0.0-1r570) but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
Am I looking at the correct drivers or should I be using something else? Can you point me in the right direction please?
ok, i have installed the necessary driver for the ps2000a. I have run the test file as root and have rw access. This is positive. I am unsure which .so file to import into my python application. I have the following:
Also, i cannot find any programming examples with the download. Any Python coding examples would be extremely useful... I could work it out easisliy with a clear example...please?