Where to get Linux command lists and descriptions for Scope?

Post your Linux discussions here
Post Reply
Stone_Mei
Newbie
Posts: 0
Joined: Fri Dec 22, 2017 6:28 am

Where to get Linux command lists and descriptions for Scope?

Post by Stone_Mei » Mon May 21, 2018 9:18 am

Hi!

Where to get Linux command lists and descriptions for Pico2208A?
If there is an list that will tell me what's linux command is not supported by Pico2208A,I will not need to spend time trying and verifying it.
For example,there is an error for Channel#0.LowPass.Enable,I found it because Pico2208A don't support LowPass filter.
2.png

Martyn
Site Admin
Site Admin
Posts: 3662
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Where to get Linux command lists and descriptions for Sc

Post by Martyn » Tue May 22, 2018 7:19 am

In the PicoScope 6 Help file there is a device feature table that will show which features are available for each scope range.
devicefeaturetable.png
Martyn
Technical Support Manager

Stone_Mei
Newbie
Posts: 0
Joined: Fri Dec 22, 2017 6:28 am

Re: Where to get Linux command lists and descriptions for Sc

Post by Stone_Mei » Wed May 30, 2018 7:15 am

Hi Martyn!

I know that.Is it the onyl way?


The other one question,for persistence mode,the Trigger is set as Repetition,the error is that not all waveforms thread the yellow trugger sign.
I think the oscilloscope may be damaged.
the error.jpg
the normal.jpg

Martyn
Site Admin
Site Admin
Posts: 3662
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Where to get Linux command lists and descriptions for Sc

Post by Martyn » Wed May 30, 2018 9:36 am

We need to see both of these data files, so can you send them in to support@picotech.com
Martyn
Technical Support Manager

Stone_Mei
Newbie
Posts: 0
Joined: Fri Dec 22, 2017 6:28 am

Re: Where to get Linux command lists and descriptions for Sc

Post by Stone_Mei » Mon Jun 04, 2018 2:52 am

Hi Martyn!

I have sent to your support e-mail,please remember to check.

Martyn
Site Admin
Site Admin
Posts: 3662
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Where to get Linux command lists and descriptions for Sc

Post by Martyn » Mon Jun 04, 2018 7:55 am

Files received, and reply sent.
Martyn
Technical Support Manager

Post Reply