Test and Measurement Forum

CAN End-of-frame

Forum for discussing PicoScope version 6 (non-automotive version)

CAN End-of-frame

Postby bennog » Tue Aug 15, 2017 11:49 am

I have a situation where a device on the network sets the end-of-frame of every packet in dominant state.
Took me some time to notice this because according the PicoScope software the frames are ok.
The yellow marked part of the message EOF needs to be recessive, but the device makes it dominant.
The problem is PicoScope markes these frames as ok.

the complete psdata file is at
http://www.ans-net.nl/picotech/20170815-0001-CAN-EOF-problem.psdata
Attachments
snap.png
bennog
Advanced User
Advanced User
 
Posts: 89
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: CAN End-of-frame

Postby Hitesh » Wed Aug 16, 2017 2:48 pm

Hi bennog,

Thank you for this. I have reported the issue to our Development Team.

Regards,
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2431
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 1 guest