Serial decode

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
afjensen
Newbie
Posts: 0
Joined: Sun May 14, 2017 8:35 am

Serial decode

Post by afjensen » Sun May 14, 2017 8:53 am

Hello, I'm totally new to occiloskobe, I am a software developer.
Huge problem to decode UART serial data.
I only get random character.
Attaches PicoSettings, and Excel table data.
Throughout the senator I have sent the letter 'u' from Tera Term.
Parameters 9600 8N1
best regards
Attachments
table.csv
(1.7 KiB) Downloaded 135 times
uartDecode.pssettings
(3.39 KiB) Downloaded 111 times

Martyn
Site Admin
Site Admin
Posts: 3333
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Serial decode

Post by Martyn » Sun May 14, 2017 5:47 pm

Can you post the psdata file, we can then look at the settings and change them to decode the data correctly.
Martyn
Technical Support Manager

afjensen
Newbie
Posts: 0
Joined: Sun May 14, 2017 8:35 am

Re: Serial decode

Post by afjensen » Sun May 14, 2017 8:23 pm

Hello Martyn,
Thanks for the quick response, here is the psdata file. Forgot to say it's 2205A I use.

Best regards
Attachments
20170514-0002.psdata
(115.64 KiB) Downloaded 109 times

Martyn
Site Admin
Site Admin
Posts: 3333
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Serial decode

Post by Martyn » Mon May 15, 2017 6:26 am

In the serial decoding dialog try changing the Threshold to 100mV and the Hysteresis to 10mV

It should sort out the problem :)
Martyn
Technical Support Manager

afjensen
Newbie
Posts: 0
Joined: Sun May 14, 2017 8:35 am

Re: Serial decode

Post by afjensen » Mon May 15, 2017 7:03 am

Excellent support

Thank you

Post Reply