Test and Measurement Forum

Problem with data collect

Forum for discussing PicoScope (version 5)

Problem with data collect

Postby arielmedina61 » Wed Jul 05, 2006 4:29 pm

Hi,
I want that the information (measurements) in the spreadsheet (.xls - Excel) to be updated automatically each time PicoScope collects new data, so I select Copy measurements and then Paste Link or Paste Special rather than Paste as this creates a DDE link between the applications.

But now this function does not work successfully.

I add an attachment to see this mistake.
Please note that ChA (blue) is registered succesfully, but not ChB(red).

Could you advise how can I do?

Thanks
Attachments
Problem-01.xls
This file contains data and a figure.
(80 KiB) Downloaded 210 times
arielmedina61
Super User
Super User
 
Posts: 21
Joined: Fri Sep 23, 2005 1:17 pm
Location: Buenos Aires-Argentina

Postby Michael » Thu Jul 06, 2006 8:55 am

Hello,

Can you send us the PSD file for the setup test you are runnig?

This will help us to get o the source of the problem.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum
Michael
Zen Master
Zen Master
 
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Postby arielmedina61 » Thu Jul 06, 2006 12:58 pm

Hi , Michael,

I send you the psd file !

Thanks

Ariel


Hello,

Can you send us the PSD file for the setup test you are runnig?

This will help us to get o the source of the problem.

Best regards,
Michael[/quote]
Attachments
2006_07_04_001.psd
(20.86 KiB) Downloaded 266 times
arielmedina61
Super User
Super User
 
Posts: 21
Joined: Fri Sep 23, 2005 1:17 pm
Location: Buenos Aires-Argentina

Postby Michael » Mon Jul 10, 2006 8:33 am

Hello Ariel,

I have used your PSD file to recreate your setup.

I have tested in Excel with success.

The Red trace(ChB) is located further down the spreadsheet, at the end of the Blue trace(ChA).

I hope this helps.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum
Michael
Zen Master
Zen Master
 
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Problem with data collect

Postby arielmedina61 » Mon Jul 10, 2006 12:14 pm

Hi, Michael.
I know the Red trace(ChB) is located further down the spreadsheet, but the values are incorrect. ChB takes a value fixed at - 2 V, when there are a sin wave showed on the PS screen!

I have performed the same test with "Pico Scope Demo" and it works ok. Every channel is located into excel file with its correct value.


Best regards,
Ariel



michael wrote:Hello Ariel,

I have used your PSD file to recreate your setup.

I have tested in Excel with success.

The Red trace(ChB) is located further down the spreadsheet, at the end of the Blue trace(ChA).

I hope this helps.

Best regards,
Michael
arielmedina61
Super User
Super User
 
Posts: 21
Joined: Fri Sep 23, 2005 1:17 pm
Location: Buenos Aires-Argentina

Postby Michael » Tue Jul 11, 2006 8:44 am

Hello Ariel,

We have identified and repaired the problem with the DDE link.

Please await the release of our next revision of PicoScope.

I thank you for your report of this error.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum
Michael
Zen Master
Zen Master
 
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Postby arielmedina61 » Tue Jul 11, 2006 11:37 am

Thank you Michael,

Please send me an e-mail when the revision is updated.


Ariel
arielmedina61
Super User
Super User
 
Posts: 21
Joined: Fri Sep 23, 2005 1:17 pm
Location: Buenos Aires-Argentina


Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests