Test and Measurement Forum

Can’t find usb_tc0832.vi

Post your LabVIEW discussions here

Can’t find usb_tc0832.vi

Postby Guest » Mon Apr 24, 2006 1:38 pm

We are trying to make a labview application to log temperatures from a Pico TC-08 USB.
In the manual it states as follows:

While it is possible to access all of the driver routines described earlier, it is easier to use
the special LabVIEW access routine.
To use this routine, copy usb_tc0832.vi from the DRIVERS subdirectory to your
LabVIEW user.lib directory. You will then need usb_tc08 sub-vi and an example subvi
which demonstrate how to use them. You can use one of these sub-vis for each of the
channels that you wish to measure. The sub-vi returns a temperature for thermocouple
types.


I have downloaded the latest software (R5.13.7) and searched the drives, but can not find the usb_tc0832.vi file.

I have a file that is called usbtc08.vi, but this vi is only an example on how to do a single scan using the DLL and does not contain any sub-vis that can be used.

Where can I find the file that the manual is referring to?
Guest
 

RE: usb tc08

Postby rayc » Wed May 03, 2006 10:17 pm

I have found the same problem, and have not really had a suitable response from Pico.

Also in the usbtc08.vi, the for loop contains a 'call library function node', with a numeric constant (107) wired to the tc_type terminal.

I am puzzled as to how the numeric is translated to a thermocouple type, such as T, B, K etc.

The documentation has no refernce whatsoever to this. In fact the documentation regarding the labview example leaves a lot to be desired and needs a great deal of revisiting in my opinion.
rayc
 

Postby Michael » Tue Jun 06, 2006 9:22 am

Hello Ray and Guest,

I have revised the TC08 VI slightly(please see attached) but will be overhauling the VI libraries.

The 107 reference is actualy an ASCII reference number for the letter "K". The attached TC08 VI has a dropw down selector list to reflect this for all the TC types.

I hope this will get you started.

Best regards,
Michael
Attachments
usbtc08 NEW a.zip
(16.11 KiB) Downloaded 4058 times
Michael - Tech Support
Pico Technology
Web Support Forum
Michael
Zen Master
Zen Master
 
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

attachment?

Postby rayc » Mon Jun 26, 2006 4:33 am

Hello Michael

I'm going blind.......where is this attachment found?

regards
Ray
rayc
Newbie
 
Posts: 1
Joined: Mon Jun 26, 2006 4:29 am

Postby Michael » Mon Jun 26, 2006 8:49 am

Hello Ray,

I will send this to your Private email address.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum
Michael
Zen Master
Zen Master
 
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

LabView Example

Postby rep2sh » Mon Jul 17, 2006 2:01 pm

Hello Michael,

would you mind to share the revised .vi with all customers?

Thank you,
regards

P. Riegger
rep2sh
Newbie
 
Posts: 1
Joined: Tue Jul 11, 2006 10:26 am

Postby Michael » Tue Jul 18, 2006 10:38 am

Hello,

Due to the current limitation of the phpBB program, we cannot post attachments to this board that all users can see.

If you would like the modified TC08 VI for LabVIEW, please reply to this post. If you are registered, I will be able to send you the VI to your private email address.

Many thanks,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum
Michael
Zen Master
Zen Master
 
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Postby delvatron » Wed Jul 26, 2006 2:03 pm

Hi,

I was wondering whether it would be possible to send me the revised Labview VI? I need to get my TC08 to log data and collate it with an LCR meter.

Many thanks,

Karl


michael wrote:Hello,

Due to the current limitation of the phpBB program, we cannot post attachments to this board that all users can see.

If you would like the modified TC08 VI for LabVIEW, please reply to this post. If you are registered, I will be able to send you the VI to your private email address.

Many thanks,
Michael
delvatron
Newbie
 
Posts: 1
Joined: Wed Jul 26, 2006 1:59 pm

Postby sharon » Fri Jul 28, 2006 2:10 pm

Hi Michael,

Same problem here, can you send it on to me as well, please?

Thanks so much!!!

Sharon
sharon
Newbie
 
Posts: 1
Joined: Fri Jul 28, 2006 2:07 pm

Postby Michael » Mon Jul 31, 2006 11:11 am

Hello,

VI sent by private email.

I have posted it here for others to use if they like.

Best regards,
Michael
Attachments
usbtc08 NEW a.zip
(16.11 KiB) Downloaded 4072 times
Michael - Tech Support
Pico Technology
Web Support Forum
Michael
Zen Master
Zen Master
 
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Postby christophe » Tue Aug 08, 2006 4:18 pm

can you send it on to me as well, please?

Thanks so much!!!
christophe
Newbie
 
Posts: 1
Joined: Tue Aug 08, 2006 12:21 pm

Postby Sarah » Wed Aug 09, 2006 12:55 pm

Hi Christophe

Michael is on holiday at the moment, I will get him to send it to you when he is back next week.

Regards
Sarah
Sarah
 

Postby Michael » Mon Aug 14, 2006 11:04 am

Hello,

The VI is posted in this forum.

Just choose the option to post a reply and then scroll down the page until you see the topic review pane. Scroll through this part until you find my post with the Zip file and choose to download.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum
Michael
Zen Master
Zen Master
 
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Postby LB » Fri Oct 06, 2006 7:43 am

Michael,

Is it possible to send me a 7.1 version of this new VI ?
We have not upgraded yet to the LabVIEW 8.xx version.

Thanks,

LB
LB
User
User
 
Posts: 2
Joined: Fri Oct 06, 2006 7:13 am
Location: Belgium

Postby PT_Lough » Fri Dec 15, 2006 4:51 pm

Hello,

I would also like a 7.1 version of this new VI

Thanks

Ed
PT_Lough
User
User
 
Posts: 4
Joined: Fri Dec 15, 2006 4:46 pm
Location: Loughbrough University

Next

Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 0 guests